You can now turn a cheap cable box into a corded phone, and it costs less than $200, says a new video that shows you how to do it.
The video, titled Cordless Phone Cordless: A Quick and Easy DIY Guide, first appeared in The Atlantic in September.
The video shows how to build your own phone cord with a phone cable, and then shows how you can attach a smartphone charger to the end of the cord.
Here’s how to make your own cordless phone cord:Connect the phone cable to the outlet on the side of the phone that is connected to your computer.
Cut the phone cord into lengths about a foot long.
Wrap the cord around the phone and bend it so that the cord reaches toward the back of the computer.
You should be able to pull it up and out of the desk.
Attach the charger to one end of your cord.
This will hold it in place.
Turn your phone cord on the computer’s display.
If you have a laptop, you can tap on the laptop icon on the desktop’s home page.
On the desktop, tap the Settings button.
Tap the “Display” tab.
Tap “Cordless Phone.”
Then tap the “Plug and Play” tab, then tap the icon for “Cable Cordless.”
The icon for Cordless will be displayed.
If it’s not shown, click on the icon to turn it on.
The cordless cord is made of stainless steel, but you can buy other cordless materials.
If your computer is not powered by an AC power source, you will need to power the computer with AC power.
If the cord is cordless, you’ll need to make sure it has a power plug, as well as a charger.
The easiest way to do this is to purchase a power strip for your computer that connects to a battery pack that plugs into the AC adapter that’s included with your computer’s AC adapter.
This power strip is about 2 feet long, but it can also be used to make a cord.
You can buy a 3-foot power strip or a 10-foot cord.
Make a phone charger Connect the phone charger to a cable that’s attached to the phone.
Make sure that the cable is secured to the cord by a locking tab.
Cut off the top of the cable, or the cable could slip out of place.
If possible, use a tape measure to measure the length of the battery that you’ll use.
You may need to use a 3/8-inch or 3/4-inch screw driver to make the connection.
Attaching the battery to the cable will help you keep the cord in place while charging.
Connect the cord to your phone by holding it in one hand and plugging it into the phone’s charger.
This gives you a cord that’s about a third of an inch long, and is attached to your smartphone by a clip that comes out of your phone’s cable.